filament/io.github.erkko68.filament/ToneMapper/Generic/Generic

Generic

actual constructor(contrast: Float, midGrayIn: Float, midGrayOut: Float, hdrMax: Float)

Parameters

contrast

Controls the contrast of the curve. Must be > 0.0, values in the range 0.5..2.0 are recommended. Default is 1.55.

midGrayIn

Sets the input middle gray, between 0.0 and 1.0. Default is 0.18.

midGrayOut

Sets the output middle gray, between 0.0 and 1.0. Default is 0.215.

hdrMax

Defines the maximum input value that will be mapped to output white. Must be >= 1.0. Default is 10.0.

expect constructor(contrast: Float = 1.55f, midGrayIn: Float = 0.18f, midGrayOut: Float = 0.215f, hdrMax: Float = 10.0f)

Parameters

contrast

Controls the contrast of the curve. Must be > 0.0, values in the range 0.5..2.0 are recommended. Default is 1.55.

midGrayIn

Sets the input middle gray, between 0.0 and 1.0. Default is 0.18.

midGrayOut

Sets the output middle gray, between 0.0 and 1.0. Default is 0.215.

hdrMax

Defines the maximum input value that will be mapped to output white. Must be >= 1.0. Default is 10.0.

actual constructor(contrast: Float, midGrayIn: Float, midGrayOut: Float, hdrMax: Float)

Parameters

contrast

Controls the contrast of the curve. Must be > 0.0, values in the range 0.5..2.0 are recommended. Default is 1.55.

midGrayIn

Sets the input middle gray, between 0.0 and 1.0. Default is 0.18.

midGrayOut

Sets the output middle gray, between 0.0 and 1.0. Default is 0.215.

hdrMax

Defines the maximum input value that will be mapped to output white. Must be >= 1.0. Default is 10.0.

actual constructor(contrast: Float, midGrayIn: Float, midGrayOut: Float, hdrMax: Float)

Parameters

contrast

Controls the contrast of the curve. Must be > 0.0, values in the range 0.5..2.0 are recommended. Default is 1.55.

midGrayIn

Sets the input middle gray, between 0.0 and 1.0. Default is 0.18.

midGrayOut

Sets the output middle gray, between 0.0 and 1.0. Default is 0.215.

hdrMax

Defines the maximum input value that will be mapped to output white. Must be >= 1.0. Default is 10.0.

actual constructor(contrast: Float, midGrayIn: Float, midGrayOut: Float, hdrMax: Float)

Parameters

contrast

Controls the contrast of the curve. Must be > 0.0, values in the range 0.5..2.0 are recommended. Default is 1.55.

midGrayIn

Sets the input middle gray, between 0.0 and 1.0. Default is 0.18.

midGrayOut

Sets the output middle gray, between 0.0 and 1.0. Default is 0.215.

hdrMax

Defines the maximum input value that will be mapped to output white. Must be >= 1.0. Default is 10.0.